Circuit Analysis Techniques

الموضوع في 'الهندسة الكهربائية' بواسطة فريشمان, بتاريخ ‏13 سبتمبر 2006.

الوسوم:
  1. فريشمان

    انضم:
    ‏18 يناير 2005
    المشاركات:
    3,816
    الوظيفة:
    طالب كهرب
    الإقامة:
    في الأرض
    الصفحة الرئيسية:
    التقييمات:
    +25 / 0 / -0
  2. فريشمان

    انضم:
    ‏18 يناير 2005
    المشاركات:
    3,816
    الوظيفة:
    طالب كهرب
    الإقامة:
    في الأرض
    الصفحة الرئيسية:
    التقييمات:
    +25 / 0 / -0
    بسم الله

    ممكن إنا نكتب أجزاءه هنا

    Fundamentals
    Ohm's Law states the voltage across a resistor, R (or impedance, Z) is directly proportional to the current passing through it (the resistance/impedance is the proportionality constant)

    [​IMG]

    Kirchhoff's Voltage Law (KVL) : the algebraic sum of the voltages around any loop of N elements is zero (like pressure drops through a closed pipe loop)

    [​IMG]

    Kirchhoff's Current Law (KCL) : the algebraic sum of the currents entering any node is zero, i.e., sum of currents entering equals sum of currents leaving (like mass flow at a junction in a pipe)

    [​IMG]
     
  3. Dior

    Dior أبو خالد

    انضم:
    ‏16 ابريل 2006
    المشاركات:
    2,196
    الوظيفة:
    Saudi Aramco
    الإقامة:
    Dhahran
    الصفحة الرئيسية:
    التقييمات:
    +14 / 1 / -2
    شكرا كثير

    الكورس ee201 في بدايته حلو بس في اخره الله اعلم
     
  4. فريشمان

    انضم:
    ‏18 يناير 2005
    المشاركات:
    3,816
    الوظيفة:
    طالب كهرب
    الإقامة:
    في الأرض
    الصفحة الرئيسية:
    التقييمات:
    +25 / 0 / -0
    بسم الله

    Nodal Analysis

    Nodal analysis is generally best in the case of several voltage sources. In nodal analysis, the variables (unknowns) are the "node voltages."

    Nodal Analysis Procedure:


    1. [*]Label the N node voltages. The node voltages are defined positive with respect to a common point (i.e., the reference node) in the circuit generally designated as the ground (V = 0).
      [*]Apply KCL at each node in terms of node voltages.


    • [*]Use KCL to write a current balance at N-1 of the N nodes of the circuit using assumed current directions, as necessary. This will create N-1 linearly independent equations.

      [*]Take advantage of supernodes, which create constraint equations. For circuits containing independent voltage sources, a supernode is generally used when two nodes of interest are separated by a voltage source instead of a resistor or current source. Since the current (i) is unknown through the voltage source, this extra constraint equation is needed.


    • [*]Compute the currents based on voltage differences between nodes. Each resistive element in the circuit is connected between two nodes; the current in this branch is obtained via Ohm's Law where Vm is the positive side and current flows from node m to n (that is, I is m --> n).

    [​IMG]

    3. Determine the unknown node voltages; that is, solve the N-1 simultaneous equations for the unknowns, for example using Gaussian elimination or matrix solution methods.


    Nodal Analysis Example

    [​IMG]

    Label the nodal voltages.
    Apply KCL.
    KCL at top node gives IS = IL + IC
    Supernode constraint eq. of VL = VS

    [​IMG]

    Solve for VT for instance.​
     
  5. فريشمان

    انضم:
    ‏18 يناير 2005
    المشاركات:
    3,816
    الوظيفة:
    طالب كهرب
    الإقامة:
    في الأرض
    الصفحة الرئيسية:
    التقييمات:
    +25 / 0 / -0
    Loop or Mesh Analysis

    Mesh (loop) analysis is generally best in the case of several current sources. In loop analysis, the unknowns are the loop currents. Mesh analysis means that we choose loops that have no loops inside them.

    Loop Analysis Procedure:

    1.
    Label each of the loop/mesh currents.

    2.
    Apply KVL to loops/meshes to form equations with current variables.

    a. For N independent loops, we may write N total equations using KVL around each loop. Loop currents are those currents flowing in a loop; they are used to define branch currents

    b. Current sources provide constraint equations.

    3.
    Solve the equations to determine the user defined loop currents.

    Mesh Analysis Example:

    [​IMG]

    1.
    Label mesh currents.
    2.
    Apply KVL.
    a- Left loop KVL:
    VS = R1I1 + R2(I1-I2)

    b- Constraint equation I2 = -IS.

    3.
    Solve for I1 and I2. Note: Branch current from mesh currents: IM = I1 - I2
     
  6. فريشمان

    انضم:
    ‏18 يناير 2005
    المشاركات:
    3,816
    الوظيفة:
    طالب كهرب
    الإقامة:
    في الأرض
    الصفحة الرئيسية:
    التقييمات:
    +25 / 0 / -0
    بسم الله

    هالكورس كله حلو
     
  7. فريشمان

    انضم:
    ‏18 يناير 2005
    المشاركات:
    3,816
    الوظيفة:
    طالب كهرب
    الإقامة:
    في الأرض
    الصفحة الرئيسية:
    التقييمات:
    +25 / 0 / -0
    بسم الله

    Electric Circuits _ 7th Edition By James W. Nilsson & nbspSusan Riedel

    http://gigapedia.org/redirect.id:408586e9f28c67eb63d8bf466a843df1.url

    http://gigapedia.org/redirect.id:bed1371ba625000b6418fffc16246dc5.url

    http://gigapedia.org/redirect.id:95729121515a1bd9d4799e3a0da1fd77.url

    (إذا ما خاب ظني واحد منها فيه سلوشن)

    [​IMG]

    Book Description
    Electric Circuits, Seventh Edition features a redesigned art program, a new four-color format, and 75% new or revised problems throughout. In the midst of these changes, the book retains the goals that have made it a best-seller: 1) To build an understanding of concepts and ideas explicitly in terms of previous learning; 2) To emphasize the relationship between conceptual understanding and problem solving approaches; 3) To provide readers with a strong foundation of engineering practices. Chapter topics include Circuit Variables; Circuit Elements; Simple Resistive Circuits; Techniques of Circuit Analysis; The Operational Amplifier; Inductors, Capacitors, and Mutual Inductance; Response of First-Order RL and RC Circuits; Natural and Step Responses of RLC Circuits; Sinusoidal Steady-State Analysis; and more. For anyone interested in circuit analysis
     
  8. system2005

    system2005 عضو

    انضم:
    ‏9 يونيو 2005
    المشاركات:
    453
    الإقامة:
    المنزل
    الصفحة الرئيسية:
    التقييمات:
    +4 / 0 / -0
    الله يعطيك العافية..
     
  9. Msasb

    Msasb عضو

    انضم:
    ‏21 ابريل 2006
    المشاركات:
    380
    التقييمات:
    +0 / 0 / -0
    يعطيك العافية
    شباب ايش رايكم بكورس Ee204 ، مرررررررررررررررررررة صعب
     
  10. فريشمان

    انضم:
    ‏18 يناير 2005
    المشاركات:
    3,816
    الوظيفة:
    طالب كهرب
    الإقامة:
    في الأرض
    الصفحة الرئيسية:
    التقييمات:
    +25 / 0 / -0
    بسم الله

    الله يعافيكم

    Ee 204 تقريبا مشابه ل Ee 201 وهذا الكورس من أسهل الكورسات في التخصص لأنه بدائيات

    بس يبيله تتمرن على أمثلة وتمارين الكتاب وإن شاء الله موفق
     
جاري تحميل الصفحة...
مواضيع شبيهة - Circuit Analysis Techniques
  1. تقييم
    الردود:
    0
    المشاهدات:
    1,123
  2. mohannd
    الردود:
    0
    المشاهدات:
    439
  3. تقييم
    الردود:
    0
    المشاهدات:
    886
  4. mohannd
    الردود:
    0
    المشاهدات:
    718
  5. mohannd
    الردود:
    3
    المشاهدات:
    1,242
  6. L19ast
    الردود:
    0
    المشاهدات:
    824
  7. أحمد يوسف
    الردود:
    0
    المشاهدات:
    873
  8. Dreamer_814
    الردود:
    5
    المشاهدات:
    3,839
  9. Omar ALSAGGAF
    الردود:
    3
    المشاهدات:
    2,096
  10. Omar ALSAGGAF
    الردود:
    1
    المشاهدات:
    1,526

مشاركة هذه الصفحة